L-Series Processors

Model L220B, designed for 22″ and smaller, short lengths, has no computer, one or two bolt-on butt plates adjustable from 8′ to 17′ to suit mill requirements. Model L240 has computer measuring, no butt plates and larger feed motors. Both are well suited to road-side or behind-the-buncher CTL processing. Require min. 25 ton class excavator or purposed-built feller buncher capable of 100 gpm.

L218

Features and benefits

Robust short wood processor, without computer, shortened version of popular L220,

with only one butt plate instead of two. Extremely fast, ideal for small to medium-sized softwood and poplar.  Weights 7,100 lbs – fits most mid-sized excavators or feller-bunchers. On thousand

pounds less than L220. Easy to work on. Designed with logger’s common sense.

L220B

Features and benefits

Robust short wood processor, without computer, designed jointly with the Levesques, the inventors of the original target processor. Extremely fast, ideal for small softwood stems. Weights 8, 400 lbs, ideal for small softwood stems. Easy to work on. Designed with logger’s common sense.

L240

New Robust 24″ Processor designed by the Levesques, the inventors of the Target Processor, specially designed for the most difficult hardwoods and softwoods

Features and benefits

Tree size capacity 24″. Delimbing capacity 2″ to 22″. Four moving delimbing knives and two fixed. Weight 6,800 lbs (c/w rotator and mount yoke). Length 11′ 10″. Height 5′ 11″. Unique high performance saw circuit running with dedicated pump produces quality cuts at an impressive rate. Top saw standard. Capacity 22″.  Butt saw adjustable between 8′ 4″ and 10′ 4″ for simultaneous two-saw bucking of last pulp length. Capacity 22″.  Dangle mount with heavyduty chain-drive rotator. Tilt cylinder allows 50-degrees movement to pick out of a pile in difficult positions. Photocells for on-the-go length reset. Optional equalizing butt plate for multi-stemming (adds approx. 1,000 lbs). Full-featured Allen-Bradley measuring system with length and diameter. Well suited to road-side or behind-the-buncher CTL processing. Valmet 1600 cc motors with 9,750 lbs feed force @4000 psi and 15 ft/sec feed speed @120 gpm. Steel rolls standard, rubber optional. Ideal carrier size 25 ton+ class excavator or purpose-built capable of 120 gpm (175 hp).